original creation date: 06/25/97 last update date: 07/08/97 last major revision date: 06/25/97 cn54f10-x rev 0a0 microcircuit data sheet triple 3-input nand gate general description this device contains three independent gates, each of which performs the logic nand function. ns part numbers 54F10DC industry part number 54f10 prime die m010 processing (blank) quality conformance inspection (blank) subgrp description temp ( c) o 1 static tests at +25 2 static tests at +70 3 static tests at 0 4 dynamic tests at +25 5 dynamic tests at +70 6 dynamic tests at 0 7 functional tests at +25 8a functional tests at +70 8b functional tests at 0 9 switching tests at +25 10 switching tests at +70 11 switching tests at 0 1
microcircuit data sheet cn54f10-x rev 0a0 (absolute maximum ratings) (note 1) storage temperature -65 c to +150 c ambient temperature under bias -55 c to +125 c junction temperature under bias -55 c to +175 c vcc pin potential to ground pin -0.5v to +7.0v input voltage (note 2) -0.5v to +7.0v input current (note 2) -30 ma to +5.0ma voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol(ma) note 1: absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c commercial supply voltage +4.5v to +5.5v commercial 2
cn54f10-x rev 0a0 microcircuit data sheet electrical characteristics dc parameter (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp range: 0c to +70c symbol parameter conditions notes pin- name min max unit sub- groups vih input high voltage recognized as a high signal 1 inputs 2.0 v 1, 2, 3 vil input low voltage recognized as a low signal 1 inputs 0.8 v 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, iin=-18ma 2, 3 inputs -1.2 v 1, 2, 3 voh output high voltage vcc=4.5v, ioh=-1.0ma 2, 3 outputs 2.5 v 1, 2, 3 vcc=4.75v, ioh=-1.0ma 2, 3 outputs 2.7 v 1, 2, 3 vol output low voltage vcc=4.5v, iol=20ma 2, 3 outputs 0.5 v 1, 2, 3 iih input high current vcc=5.5v, vin=2.7v 2, 3 inputs 5.0 ua 1, 2, 3 ibvi input high current breakdown test vcc=5.5v, vin=7.0v 2, 3 inputs 7.0 ua 1, 2, 3 icex output high leakage current vcc=5.5v, vout = vcc 2, 3 outputs 100 ua 1, 2, 3 vid input leakage test vcc = 0.0v, iid = 1.9ua, all other pins grounded 2, 3 inputs 4.75 v 1, 2, 3 iod output leakage circuit current vcc = 0.0v, viod = 150mv, all other pins grounded 2, 3 outputs 4.75 ua 1, 2, 3 iil input low current vcc=5.5v, vin = 0.5v 2, 3 inputs -0.6 ma 1, 2, 3 ios output short-circuit current vcc=5.5v, vout=0v 2, 3 outputs -60 -150 ma 1, 2, 3 icch power supply current vcc=5.5v, vo = high 2, 3 vcc 2.1 ma 1, 2, 3 iccl power supply current vcc=5.5v, vo = low 2, 3 vcc 7.7 ma 1, 2, 3 3
cn54f10-x rev 0a0 microcircuit data sheet electrical characteristics ac parameter (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms tr=2.5ns, tf=2.5ns see ac figs. temp range: 0c to +70c symbol parameter conditions notes pin- name min max unit sub- groups tplh propagation delay vcc=+5.0v @ +25c, vcc=4.5v & 5.5v @ 0/+70c 2, 3 an/bn/c n to on 2.4 5.0 ns 9 2, 3 an/bn/c n to on 2.4 6.0 ns 10, 11 tphl propagation delay vcc=+5.0v @ +25c, vcc=4.5v & 5.5v @ 0/+70c 2, 3 an/bn/c n to on 1.5 4.3 ns 9 2, 3 an/bn/c n to on 1.5 5.3 ns 10, 11 note 1: guaranteed by applying specific input condition and testing vol & voh. note 2: screen tested 100% on each device at +75c temperature only, subgroups a2 & a10. note 3: sample tested (method 5005, table 1) on each mfg. lot at +75c temperature only, subgroups a2 & a10. 4
microcircuit data sheet cn54f10-x rev 0a0 revision history rev ecn # rel date originator changes 0a0 m0001685 07/08/97 linda collins legal issue with fairchild, due to the fairchild/national split, is forcing the change from cn74f which is 'fairchilds' product code to cn54f which is 'nationals' product code. 5
|
